Magnetic Autocontrol MHTM MicroDrive, Руководство по эксплуатации

Страница: 131 / 196

Barrier MHTM
TM
MicroDrive
Parameterising control unit
5815,5001US / Version 02.66 131
10.10.8 Start-up behaviour
Use this menu to select the start-up behaviour of the barrier
according to the following events:
 after switching on voltage supply
 after return of voltage

after reset
You can select between 7 options: The default setting is option "1".
NOTE!
The display messages "Waiting for passage" and
"Waiting for release" can be confirmed with the left
button of the control unit. Ensure that no persons or
vehicles are present below the barrier arm. In
operating modes 3 to 8, the barrier will close as
soon as the message has been confirmed. In
operating modes 1 and 2, a closing signal is still
required after the message is confirmed.
Operating view

Main menu

Settings

Start-up behaviour (Start-up behav.)
Option Description
1
Reference run
In this option, the barrier initially performs a reference run. This means that the
barrier opens completely at low speed.
Release signal
No release signal is required to close the boom.
Closing behaviour
 Program modes 1 or 2:
If a safety loop is installed, the barrier closes only after a vehicle has
passed through and a permanent closing signal is pending. If only a safety
light barrier is installed, no passage is required. The barrier closes at once
when a permanent closing signal is applied.
 Program modes 3 to 8:
If a safety loop is installed, the barrier closes when the first vehicle has
driven through. If only a safety light barrier is installed, the barrier closes at
once when the voltage returns.