Magnetic Autocontrol MHTM MicroDrive Access Series, Руководство по эксплуатации

Страница: 48 / 144

Barrier MHTM
TM
MicroDrive Access and Parking
Assembly and installation
48 5815,5013US / Version 05
8 Assembly and installation
8.1 Safety
→ See also safety notes on page 18, chapter 2.6 "Occupational
safety and special dangers".
Non-intended use WARNING
Non-intended use is dangerous!
Any use of the barriers other than intended and/or
in a different manner can cause hazardous
situations.
The barrier system is intended for installation only
on crossings used for vehicles. Pedestrians must
be supplied with a separate access opening. The
pedestrian access opening shall be designed to
promote pedestrian usage. Locate the barrier such
that persons will not come in contact with the
vehicular passageway during the entire path of
travel of the vehicular barrier.
Danger of crushing and shearing,
barrier arm
WARNING
Danger of crushing and shearing when the
barrier opens or closes!
When a barrier opens or closes, the barrier arm
may lead to severe crushing or injury!
– Keep a safety distance of at least 2 ft (610 mm)
between the barrier arm and other objects, such
as walls, masonry or houses.
→ See also
page 25, chapter 2.7.
– Install the barrier system only when all exposed
pinch points are eliminated or guarded.
– Assemble and install barrier system according
to Fig. 13.
– Controls intended for user activation must be
located at least 6 ft (1.83 m) away from any
moving part of the barrier and where the user is
prevented from reaching over, under, around or
through the barrier to operate the controls.
Outdoor or easily accessible controls shall have
a security feature to prevent unauthorized use.