Magneti Marelli MM OD-04, Руководство пользователя, Страница: 5 / 8

Package Contents
Please inspect and look for damages from shipping when package is first received. If the unit is
damaged in any way, please contact customer service and include pictures if possible.
In the package, you will find:
a)
English manual
b)
Oil tank
c)
Oil tray
d)
Strain
Operation Instruction
1)
Setup Setup (Refer below instruction and figure)
a)
Install the oil tray and lifting pole in ‘Clock-wise’ direction
b)
Ensure the lifting pole is perpendicular with the machine
NOTICE: Place the machine in a flat ground to avoid sliding during operation.
Oil temperature higher than 80 ° C will cause seriously damage to the components,
in worst case it could bring to machine failure.
2) Oil Collection
.Lift the vehicle to proper height
1.Move the oil extractor below the car engine, oil tray position right under the vehicle oil drain
hole.
2. Ensure ball valve
②
is off
3. Open the wing valve
③
(by rotating it in anticlockwise direction, vertical sitting as open)
4. Open the mini ball valve
①
, release tank pressure
5. release oil drain bolt
6. Waste oil is transfer from the oil tray to the oil tank
3)
Tank Emptying
1.Turn off all ball valve
2. Hold the ejection hook and insert it into the external disposal tank
3. Connect the air compressor with the air inlet
①