Magneti Marelli MM OD-04, Руководство пользователя, Страница: 2 / 8

Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to reduce
the risk of personal injury and damage to equipment.
1.
Keep work area clean. Cluttered areas invite injuries.
2.
Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically powered
tools in the presence of flammable gases or liquids.
3.
Keep children away. Children must never be allowed in the work area. Do not let them
handle machines, tools or extension cords.
4.
Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust.
Always lock up tools and keep out of reach of children.
5.
Avoid Unintentional Starting . Be sure the air pressure is in the off position when not in use
and before making hose connection.
6.
Stay alert . Watch what you are doing, use common sense. Do not operate any tool when you
are tired.
7.
Check for damaged parts . Before using any tool, any part that appears damaged should be
carefully checked to determine that it would operate properly and perform its intended
function. Check for alignment and binding of moving parts; any broken parts or mounting
fixtures; and any other condition that may affect proper operation. Any part that is damaged
should be properly repaired or replaced by a qualified technician. Do not use the tool if any
control or switch does not operate properly.
8.
Replacement parts and accessories. When servicing, use only identical replacement parts.
Use of any other parts will void the warranty. Only use accessories intended for use with this
tool.
9.
Do not operate tool if under the influence of alcohol or drugs. Read warning labels if
taking prescription medicine to determine if your judgment or reflexes are impaired while
taking drugs. If there is any doubt, do not operate the tool.
10.
Maintenance. For your safety, service and maintenance should be performed regularly by a
qualified technician.