After the operations described in the previous section, connect
HP
quick connector (red)
of the device to the external tank using a supplied adapter.
Open the coupling by twisting the valve clockwise.
Open the valve on the external tank.
There are two different tanks available: with and without suction pipe.
tanks with
suction pipe
must be positioned straight to let the liquid refrigerant flow. These
tanks must be connected to
L
(liquid) coupling.
tanks
without suction pipe
have only one valve and therefore must be put with their top
down to let the liquid refrigerant flow.
TANKS
Tank with a float
Tank without a float
Open HP valve on the main panel
If the device is in stand-by, press
ENTER
Registration no. □
Other Menu ■
Press
UP–DOWN
to select Other menu. Confirm by pressing
ENTER
.
Cylinder filling ■
Servicing □
Push
UP–DOWN
to select cylinder filling. Confirm by pressing
ENTER
Printing □
Diagnostics □
Printing
and
Diagnostics
are available only if memory card and/or printer is installed
.
Connect high pressure hose
to the external cylinder
. Confirm by pressing
ENTER
Open cylinder valve