SOFTWARE
The device must be used with the software supplied by Tecnomotor. The software and setup are enclose into the CD included in the
packaging.
SOFTWARE INSTALLATION
Close all the software
Temporarily disable any antivirus / firewall
Insert the CD-ROM included in the packaging into the PC. The installation will start automatically.
In the case the installation does not start automatically explore the CD_ROM and run the setup.exe file.
Select the language and follow the instructions.
Plug/Unplug the device to PC
PC CONNECTION
1.
Turn on the PC and start the application. Wait until the
application’s working.
2.
Connect the USB cable to the device (supplied).
3.
Connect the USB cable to the PC. The led on device blinking.
4.
If request please install the driver as depicted into installation manual (the driver file is located into “OBD-
ROAD/driver
” folder)
5.
If the USB port is not settled please select “System Setup” from SETTING menu. The software will search
automatically the device
OBD ROAD’s SOFTWARE DESCRIPTION
OBD-ROAD SW is the interface for displaying and analyzing the live data captured by the OBD-ROAD device. This data are EOBD
live data supplied by the vehicle’s ECU and captured into the OBD-ROAD memory during the trip through the diagnostic connector
of th
e vehicle. The live date are recorded into “travels”. The live data capture starts when the engine is cranked on and the ODB-
INSIDE device is in communication with the vehicle’s ECU. The live data capture shuts down when the Dashboard is being turn off.
With the OBD-ROAD you can save fuel. With the Eco-Drive mode you can monitor the consumption and driving style. n the Menu
you can find the following items:
OBD-ROAD: it is needed to set the parameters you want to record from the vehicle. Into this page you can select directly
the live data or use the preconfigured items.