![background image](http://html1.mh-extra.com/html/magnetek/impulse-link-5/impulse-link-5_user-manual_3572949004.webp)
IMPULSE
®
•Link 5 Instruction Manual
April 2020
Page 4 of 47
Preface and Safety
© 2020 MAGNETEK
All rights reserved. This notice applies to all copyrighted materials included with this product, including, but not
limited to, this manual. This manual is intended for the sole use of the persons to whom it was provided, and any
unauthorized distribution of the manual or dispersal of its contents is strictly forbidden. This manual may not be
reproduced in whole or in part by any means whatsoever without the expressed written permission of Magnetek.
IMPULSE
®
•Link 5 software is copyrighted by Magnetek. All rights reserved.
Product Safety Information
Magnetek, Inc. (Magnetek) offers a broad range of radio remote control products, control products and adjustable
frequency drives, industrial braking systems, and power delivery products for material handling applications. This
manual has been prepared by Magnetek to provide information and recommendations for the installation, use,
operation
and service of Magnetek’s material handling products and systems (Magnetek Products). Anyone who
uses, operates, maintains, services, installs or owns Magnetek products should know, understand and follow the
instructions and safety recommendations in this manual for Magnetek products.
The recommendations in this manual do not take precedence over any of the following requirements relating to
cranes, hoists, lifting devices or other equipment which use or include Magnetek products:
•
Instructions, manuals, and safety warnings of the manufacturers of the equipment where the Magnetek
Products are used,
•
Plant safety rules and procedures of the employers and the owners of the facilities where the Magnetek
Products are being used,
•
Regulations issued by the Occupational Health and Safety Administration (OSHA),
•
Applicable local, state, provincial, or federal codes, ordinances, standards and requirements, or
•
Safety standards and practices for the industries in which Magnetek Products are used.
This manual does not include or address the specific instructions and safety warnings of these manufacturers or
any of the other requirements listed above. It is the responsibility of the owners, users and operators of the Magnetek
Products to know, understand and follow all these requirements. It is the responsibility of the employer to make its
employees aware of all the above listed requirements and to make certain that all operators are properly trained.
No one should use Magnetek Products prior to becoming familiar with and being trained in these requirements and
the instructions and safety recommendations for this manual.
Product Warranty Information
For information on Mag
netek’s product warranties by product type, please visit the Material Handling site at
www.magnetekmh.com.
Содержание IMPULSE Link 5
Страница 43: ...IMPULSE Link 5 Instruction Manual April 2020 Page 43 of 47 OmniPulse DDC Series 2 MagnePulse DMC Series 2...
Страница 44: ...IMPULSE Link 5 Instruction Manual April 2020 Page 44 of 47 OmniPulse DDC Series 1 MagnePulse DMC Series 1...
Страница 45: ...IMPULSE Link 5 Instruction Manual April 2020 Page 45 of 47 OmniPulse DSD...
Страница 47: ...IMPULSE Link 5 Instruction Manual April 2020 Page 47 of 47 IL5 Professional kit contents 4 5...