Magnescale SR75, Инструкция к добавке

Страница: 14 / 36

4
(E)
SR74 / SR75, CH33
Fig. 7
Installation example
Example 1 (recommended): Installation when a stop surface of the scale and slider is
made with the bracket
Scale installation accuracy is improved when a stop surface is made. This also simplifies reinstallation of the
scale.
1. Check and adjust the scale bracket’s parallelism with respect to the machine guide, and then secure in
place.
As shown in the figure, adjust the parallelism over the entire bracket length even when making a difference
in levels on the scale installation surface.
2. Check and adjust the height and parallelism of the slider bracket, and then secure in place.
Scale
bracket
7.5 ± 0.05
Or
0.1 MG
Fig. 6
57.9 ± 0.3
0 ± 0.2
0.05 or less
Slider bracket Scale bracket
Slider bracket
0.05 MG
57.9 ± 0.3
Unit: mm
Unit: mm