Magner PRB страница 19 Скачать руководство пользователя

Страница: 19 / 22

MESSAGES IN COURSE OF OPERATION

Table 2. Error messages

Error

Messages

P.O.S.T.

ERROR

An error occurred during self-

testing of the counter (at its

switching on), the sensors are

covered by foreign object.

An error occurred during self-

testing of the counter (before

the start of a count), the

sensors are covered by

foreign object.

Switch off the machine.

Remove banknotes and/or

foreign objects from the

hopper, the stacker, the reject

pocket, and the path. Then

switch on again. If the error is

reappeared, call a technician.

Switch off the machine.

Remove banknotes and/or

foreign objects from the

hopper, the stacker, the reject

pocket, and the path. Then

switch on again. If the error is

reappeared, call a technician.

Reason

Teller's actions

S.M.A.R.T.

ERROR

The banknotes are jammed. A

foreign object in the path

blocks the gear and causes

the overcurrent.

Switch off the machine. Open

the path, and remove the

jammed banknotes, the

foreign objects.

Overcurrent

The banknotes get jammed.

Foreign object in the path

blocks the switch between the

hopper and the reject pocket.

Open the path, remove the

jammed banknotes, foreign

objects from switch area.

Switch

error

The calibration error is

occurred during the self-test.

Switch off the machine. Open

the path and remove the

banknotes, the foreign objects

blocking CIS (

see item 3

Figure 5

Figure 6

). Then

switch on again. If the error is

reappeared, call a technician.

Calibration

error

Table 2

Error

Messages

Note's jam,

clean the

path!

A banknote is jammed in the

path during counting.

More banknotes than required

were placed into the stacker in

the batch mode

Remove banknotes from the

hopper, open the path and

remove the banknotes from

there.

The red circles on the picture

are marked the places of

possible jams.

Remove the banknotes from

the stacker, and recount the

batch.

Reason

Teller's actions

Batch

error

Counting error

Clean the stacker, and

recount the banknotes.

Counting

error please,

re-count

Incorrect feeding of the

banknotes.

Remove banknotes from the

hopper, open the path and

remove the banknotes from

there.

Adjust the hopper's guides

according to the length of the

longest banknote in the batch,

level the batch edges

(separate banknotes shall not

to protrude from the batch),

and place them in the hopper

avoiding their skew.

Feed

error

Table 3. Info messages

Path's open

The path is open, the upper

part is open.

Close the path.

Messages

Path's closed

Path cleaning

After the path is closed, the

self cleaning of the path is in

progress.

Wait till cleaning of the path is

over.

Reason

Teller's actions

MAGNER PRB VALUE COUNTER

Содержание PRB























Результаты поиска

Содержание PRB

Отзывы:

Похожие инструкции для PRB

Бренды по названию

Популярные бренды

Magner PRB, Руководство пользователя

Результаты поиска

Содержание PRB

Отзывы:

Похожие инструкции для PRB

Бренды по названию

Популярные бренды