MagneMotion MagneMover LITE, Руководство пользователя, Страница: 47 / 382

Safety
Safety Considerations
MagneMover LITE User Manual 5
Rockwell Automation Publication MMI-UM002E-EN-P - March 2016
• Safety Shoes
Shoes with protective toes should be worn to protect feet from dropping tools
or parts.
• Observe the facility guidelines pertaining to loose clothing while working around or
operating the MagneMover LITE transport system.
• It may be recommended that the use of hazardous materials, such as cleaning fluids, be
used during routine maintenance procedures. Read and understand the facility’s haz-
ardous materials policies and the MSDS (provided by the manufacturer) for each sub-
stance.
• Whenever power is applied, the possibility of automatic movement of the vehicles
(pucks) or user-supplied equipment in the MagneMover LITE transport system exists.
It is the user’s responsibility to provide appropriate safeguards.
• Ensure propulsion power is disabled when performing maintenance on the vehicles
(pucks), track system, or motors.
• Ensure the MagneMover LITE motors and related components are properly decontam-
inated before performing any service following the facilities’ decontamination proce-
dures. Follow all facility, local, and national procedures for the disposal of any
hazardous materials.
• Ergonomic hazards may exist with certain installation or service operations pertaining
to the MagneMover LITE transport system.
Equipment Safety Guidelines
The following safety considerations are provided to aid in the placement and use of the Mag-
neMover LITE transport systems.
• If hazardous materials are to be present, users must observe the proper safety precau-
tions and ensure that the material used is compatible with those from which the Mag-
neMover LITE components are fabricated.
• Determine if the MagneMover LITE transport system will be employed in an earth-
quake prone environment and install the equipment accordingly.
• The MagneMover LITE components are not provided with an Emergency Off (EMO)
circuit. The user is responsible for an EMO circuit (refer to
E-Stops on page 6-13 for
more information).
• Do not place the MagneMover LITE transport system’s connections (power and com-
munications cables) where they could cause a trip hazard.
• Do not place the MagneMover LITE transport system in a location where it may be
subject to physical damage.
• Ensure that all electrical and pneumatic connections to the MagneMover LITE compo-
nents are made in accordance with the appropriate facility, local, and national regula-
tions.