manualshive.com logo in svg

MagneMotion MagneMover LITE, Руководство пользователя, Страница: 358 / 382

Поделиться
Скачать
MagneMotion MagneMover LITE Скачать руководство пользователя страница 358

Maintenance
Shipping

74

MagneMotion

Rockwell Automation Publication MMI-UM002E-EN-P - March 2016

Shipping

If a component of the MagneMover LITE transport system must be shipped, either for return 
to MagneMotion or to another location, it must be packaged properly to ensure it arrives 
undamaged. The following procedure provides the correct method for handling and packaging 
MM LITE components for shipment.

Required Tools and Equipment

•

Metric Hex wrenches.

•

English Hex wrenches.

•

Open end wrench, adjustable.

•

Fork truck or appropriate lift as required.

CAUTION

Electrical Hazard

Before beginning this procedure the MagneMover LITE
transport system must be shut down following the procedure
provided in 

Safe Shut-down

 on page 6-27

.

CAUTION

Heavy Lift Hazard

Some of the MagneMover LITE components can weigh as
much as 14.5 kg [32 lb]. Failure to take the proper precau-
tions before moving them could result in personal injury.

Use proper lifting techniques when moving any Magne-
Mover LITE components. Steel toe shoes should be worn at
all times when packing and shipping any MagneMover LITE
components.

kg

Содержание MagneMover LITE































































































































































































































































































































































































Отзывы:

Нет отзывов