manualshive.com logo in svg

MagneMotion MagneMover LITE, Руководство пользователя, Страница: 337 / 382

Поделиться
Скачать
MagneMotion MagneMover LITE Скачать руководство пользователя страница 337

Maintenance

Repair

MagneMover LITE User Manual

53

Rockwell Automation Publication MMI-UM002E-EN-P - March 2016

Replacing Magnet Arrays On Precision Rail Vehicles

Magnet arrays can be removed and replaced if they become damaged. Or, if the Precision Rail 
Vehicle becomes damaged, the magnet array can be removed and installed on a new vehicle.

CAUTION

Strong Magnets

To avoid severe injury, people with pacemakers and other
medical electronic implants must stay away from the magnet
array on the vehicles.

To avoid injury from strong magnetic attractive forces:
•

Handle only one vehicle or magnet array at a time.

•

Do not place any body parts, such as fingers, between a 
vehicle or magnet array and any ferrous material or 
another magnet array.

•

Vehicles or magnet arrays not being used should be 
secured individually in isolated packaging.

To avoid damage to watches, instruments, electronics, and
magnetic media, keep metal tools, metal objects, magnetic
media (memory disks/chips, credit cards, and tapes) and elec-
tronics away from the magnet arrays.

Содержание MagneMover LITE































































































































































































































































































































































































Отзывы:

Нет отзывов