MagneMotion MagneMover LITE, Руководство пользователя, Страница: 319 / 382

Maintenance
Repair
MagneMover LITE User Manual 35
Rockwell Automation Publication MMI-UM002E-EN-P - March 2016
Replace Pucks
Pucks should be replaced if they become damaged or worn. Additionally, pucks may be added
to, or removed from, the transport system if the quantity of pucks in use is not correct. If the
transport system does not contain an open spur that can be used to insert or remove pucks, use
the following procedure to replace pucks.
Required Tools and Equipment
• Torque wrench with the following bits:
• 4 mm Hex.
• T30 Torx.
• Loctite 243, Thread locker, Anaerobic Adhesive, Blue.
CAUTION
Strong Magnets
To avoid severe injury, people with pacemakers and other
medical electronic implants must stay away from the magnet
array on the vehicles (pucks).
To avoid injury from strong magnetic attractive forces:
•
Handle only one vehicle (puck) or magnet array at a time.
• Do not place any body parts, such as fingers, between a
vehicle (puck) or magnet array and any ferrous material
or another magnet array.
• Vehicles (pucks) or magnet arrays not being used should
be secured individually in isolated packaging.
To avoid damage to watches, instruments, electronics, and
magnetic media, keep metal tools, metal objects, magnetic
media (memory disks/chips, credit cards, and tapes) and elec-
tronics away from the magnet arrays.