MagneMotion MagneMover LITE, Руководство пользователя, Страница: 185 / 382

Specifications and Site Requirements
Site Requirements
MagneMover LITE User Manual 67
Rockwell Automation Publication MMI-UM002E-EN-P - March 2016
Precision Locator
Temperature:
Operating: 0° C to 50° C [32° F to 122° F]
Shipping: -18° C to 50° C [0° F to 122° F]
Storage: -18° C to 50° C [0° F to 122° F]
Humidity:
85% Maximum (relative, non-condensing)
Magnet Arrays, Pucks, Precision Rail Vehicles
Temperature:
Operating: 0° C to 50° C [32° F to 122° F]
Shipping: -18° C to 60° C [0° F to 140° F]
Storage: -18° C to 60° C [0° F to 140° F]
Humidity:
85% Maximum (relative, non-condensing)
Lighting, Site:
No special lighting is required for proper operation of the MagneMover LITE transport sys-
tem. Maintenance may require a user-supplied service lamp (e.g., flashlight).
Floor Space and Loading
The site for the MagneMover LITE transport system must meet the minimum space require-
ments defined after developing the layout as defined in
Transport System Layout on page 3-2
and referencing the Mechanical Specifications on page 4-3 to ensure proper clearance for
installation, operation, and servicing of the MM LITE motors and other components. Note
that the dimensions given are for the MM LITE motors and components only. It is the user’s
responsibility to ensure adequate space around the equipment for operation and service based
on their needs and any vehicle overhang.
Facilities
The user is responsible for providing the facilities specified in Electrical Specifications on
page 4-38 and Pneumatic Specifications on page 4-61 to ensure proper operation of the Mag-
neMover LITE motors and other components. Refer to Facilities Connections on page 5-60
for the connection of all facilities to the MagneMover LITE transport system.