Magnavox MG-06CR, Руководство пользователя

Страница: 9 / 20

Temp Temp
Timer
Timer
On
Off
Sleep
Check
Filter
Timer
Auto
Cool
Dry
Fan
Low
Auto
Med
High
Clean
Air
TIMER: AUTO START/
STOP FEATURE:
Press TIMER
button
DO THIS:
AIR CONDITIONER FEATURES(CONTINUED)
NOTE:
Temp Temp
Timer
Timer
On
Off
Sleep
Check
Filter
Timer
Auto
Cool
Dry
Fan
Low
Auto
Med
High
Clean
Air
CHECK FILTER FEATURE:
Press CHECK
FILTER button
DO THIS:
Temp Temp
Timer
Timer
On
Off
Sleep
Check
Filter
Timer
Auto
Cool
Dry
Fan
Med
High
Clean
Air
CLEAN AIR FEATURE:
(only on some models)
Press CLEAN
AIR button
DO THIS:
This feature is a reminder to clean the Air Filter for
more efficient operation. The LED (light) will illumi-
nate after 250 hours of operation. To reset after
cleaning the filter, press the Check Filter button and
the light will go off.
NOTE:
Press the CLEAN AIR button, the ion generator is
energized and will help to remove pollen and im-
purities from the air, and trap them in the filter.
NOTE:
8
- Press the TIMER button, and the TIMER ON indicator
light will illuminate to indicate that the AUTO START
program is initiated.
- Press the TIMER button again to show the TIMER OFF
- Press or hold the UP or DOWN button to change the
then at 11 hour increments up to 24 hours. T he control w ill
will count down the time remaining until start. The
selected time will register in 5 seconds, and the system
will automatically revert back to display the previous
temperature setting or room temperature when the
unit is on.(when the unit is off, there is no display.)
- Turning the unit ON or OFF at any time or adjusting
the timer setting to 0.0 will cancel the Auto START/
STOP program.
indicator light which indicates that the AUTO STOP
program is initiated.
Temp Temp
Timer
Timer
On
Off
DISPLAYS:
Displays
O O Shows the set temperature in C or F and the
only mode,it
shows the room temperature.
DISPLAYS:
timer duration by 30 minute increments, up to 10 hours
-
Evaporator temperature sensor error
call for service.
NOTE: is displayed as shown in the left diagram.
HS -
Electric heating sensor error
call for service.
Error codes:
AS- Room temperature sensor error
call for service.
NOTE:In Fan only mode, it will display LO or HI .
-Unplug the unit and plug it back in. lf error repeats,
-Unplug the unit and plug it back in. lf error repeats,
-Unplug the unit and plug it back in. lf error repeats,
.
.
.
HS-
only mode,it
The control then at
AUTO-TIMER settings. While in Fan only mode, it