Magnavox MAG-ANT-104, Быстрый старт

Страница: 1 / 2

For the Installer (1 of 3)
This antenna should be installed by
a qualified professional. Ref er to the
diagrams shown below for installa­
tion. • Do not overtighten screws
during installation. • For best signal
reception, install the antenna as high
as possible with a clear line of sight
all around. Barriers around the anten­
na will decrease performance. • The
motor, gears, and low-noise micro­
wave amplifier within the antenna
are not designed to be serviced by
the user. Repairs should be
performed by a qualified service
technician. DO NOT DISASSEMBLE.
Step 1
Unfold and lock the dipoles of the
VHF mast into place. Move the
smaller "U" dipole to the other end of
the boom.
Step2
Set the VHF mast on the base, taking
care to match the peg on the base to
the notch on the boom. The "U"
dipole should be set to the right. Use
two wing nuts and two 4x25mm
screws to fix the mast to the motor­
ized base. DO NOT OVERTIGHTEN.
The motorized base should
be fixed to a rooftop pole
with the built-in wingnuts.
Thank You
Thank you for your purchase of the
MAGNAVOX MAG-ANT-104 outdoor
antenna. This manual is designed to help
you learn how to assem­ble, operate and
enjoy your new antenna for years to
come. Please read this manual
carefully and retain it for future
reference.
Overview
After the antenna has been securely
installed outside:
1. Use the included 50' coaxial cable
to connect the antenna to the
ANTENNA INPUT of the control box.
2. Connect the TV1 cable of the control
box to an available TV INPUT. {Con­
nect a second TV to TV2.)
3. Connect the control box to AC
household power. Once all connec­
tions have been made, you can turn
everything on.
4. Set the input mode of the TV to
match the connector used with the
antenna (e.g., TV ANT). The names
of these connectors and modes
differ by manufacturer.
5. Use the TV system menu to scan for
available channels. Refer to the
instructions provided by the TV
manufacturer to learn more.
r
�
Images in the figure may not match the
actual product. The figure is for illustra­
tive purposes, only.
�
)
360
°
Model No: MA G-ANT-104
Rotating Outdoor Antenna
HD/DTV /UHF /VHF /FM
Installation
This antenna is intended for outdoor
use and should be installed on a roof or
exterior of a building. Installation should
be done by a qualified professional who
can evaluate the installation site to
safely secure the antenna and find a
location that will maximize reception
from local broadcast stations.
50' coaxial cable
(included)
Television
Remote
control