4 Use your TV
Watching Channels from an External
Device
1
Turn On the Set-top Box or the Connected Device.
●
The picture from the Set-top Box or the Connected Device
might appear Automatically on the TV screen.
If the picture does not appear
①
Press
SOURCE
Repeatedly to Select the Set-top Box or the
Connected Device and wait a few seconds between each
selection until the Picture appears.
②
Use the Remote Control for the Set-top Box or the Connected
Device to select Channels to view.
Switching Audio Mode
Digital TV Operation
1
Press
SAP
to display the currently
selected Language and the number of
available Languages.
2
Press
SAP
Repeatedly to cycle
through the available Audio Languages.
11.1
1/3
English
O
Note(s)
●
Available Languages differ depending on the Broadcast.
●
Other
is displayed when the Audio Language cannot be found
or available Languages are other than English, French or Spanish.
Cable / NTSC (Analog) TV Operation
1
Press
SAP
to display the currently selected Audio mode.
2
While receiving an MTS broadcast,
press
SAP
Repeatedly to cycle
through the available Audio Channels.
11
SAP / STEREO
Changing Picture and Sound Settings
You must set
Home
in
Location
Otherwise, personalized Picture and Sound settings will not
be memorized after the Unit goes into Standby Mode.
Changing Picture Settings
1
Press
MENU
and use
H
I
to select
Picture
, then press
OK
.
18
50
30
30
0
2
USB
Language
Features
Setup
Sound
Picture
Personal
Advanced settings
Sharpness
Tint
Color
Brightness
Contrast
Backlight
Auto picture
2
Use
H
I
J
K
to Select the item you want to adjust,
then press
OK
.
Auto picture
to select the desired Setting, then press
OK
(
Personal
,
Standard
,
Vivid
,
Sports
,
Movie
,
Game
and
Eco
)
J
Cursor
Cursor
K
Backlight
to Reduce Power
Consumption and
Brightness
to Increase Power
Consumption and
Brightness
Contrast
to Decrease Contrast
to Increase Contrast
Brightness
to Decrease
Brightness
to Increase Brightness
Color
to Decrease Color
Intensity
to Increase Color
Intensity
Tint
to Add Red
to Add Green
Sharpness
to Soften
to Sharpen
Advanced settings
to Select the desired Setting, then press
OK
.
(
Color alignment
,
Noise reduction
,
Ambient light
sensor
,
Black stretch
,
Dynamic contrast
,
Gamma
,
Film mode
and
BMR 120
)
O
Note(s)
●
When
Ambient light sensor
is Set to
On
it adjusts Backlight for
the Best Picture Quality by Dynamically Adjusting the Backlight
Intensity in accordance with the Room Lighting Condition. Please
ensure the Room Lighting is Stable and the Light Sensor is Not
Blocked.
Changing Sound Settings
1
Press
MENU
and use
H
I
to select
Sound
, then press
OK
.
USB
Language
Features
Setup
Sound
Picture
Stereo
Multichannel
On
Off
On
Standard
Primary MTS
Digital output format
TV speakers
Auto volume leveling
Sonic Emotion
Equalizer
Auto sound
Digital audio preferences
2
Use
H
I
J
K
to Select the item you want to adjust,
then press
OK
.
7
Continued on next page.
English
