background image

ON   OFF

Satellite

TV 1

ON = TV
OFF = Cable

AM/FM ANTENNA

TV  ANTENNA

TV  ANTENNA

TV  2

TV  3

CABLE IN

TV 1

TV 2

TV 3

Gasket

Mounting Bolts

Mounting Stand

Locking Nut

Vehicle’s Roof

Mounting Bracket

Washer

Locking Washer

Nut

Cable Input Plate   

(Not Supplied)

Distribution Wall Plate (Supplied Separately)

Models: 

WS-W

 (White) or 

WS-B

 (Black)

Coaxial Cable

(Purchased Separately)

Coaxial Cables

(Purchased

  Separately)

Coaxial Cable

(Purchased Separately)

Satellite Antenna

(Not Supplied )

Coaxial Cable

(Purchased Separately)

AM/FM Receiver (Not Supplied)

Red Wire

 +12V DC

Black Wire

 Ground

AM/FM ANTENNA

No Connection

(for use with 

RVTV-B1 or 

RVTV-W1 only)

Models: RVTV-B2 (Black)
              RVTV-W2 (White)

1111 West Victoria Street 

Compton, CA 90220  

www.magnadyne.com

© Copyright 2013 Magnadyne                          For Technical Assistance, please call (800) 638-3600

Installation Instructions

RVTV-X2-IMUM Rev. A 1-7-13

Installation

Step 1: Choosing a Location: Make sure the mounting location has a sufficient 

flat area so the antenna’s mounting stand can be mounted flat.

Step 2: Drilling Holes: Use the mounting bracket as a template to determine 

where to drill the holes.

Step 3: Assembling the Antenna: Rotate the antenna’s locking nut all the way down 

on the base. Gently pull the antenna’s cables thru the mounting stand. Screw 

the antenna onto the mounting stand then rotate up the locking nut to lock 
the antenna into place.

Step 4: Attaching the Antenna: Feed the cables thru the gasket then thru the hole 

in the roof. Put the mounting bolts thru the holes in the mounting stand. 

On the interior, place the mounting bracket then use the washers and nuts 

to secure the antenna. 

 

Caution:

 Do not overtighten the mounting bolts, damage to the mounting 

stand or roof may occur.

 

Step 5: Wiring: Connect the cables from the antenna to distribution wall plate and 

to the radio. Connect the power cables from the distribution wall plate 

according to the diagram below.    

Technical Specifications

Frequency range: VHF: 47-230MHz

 

UHF: 470-862MHz

Receiving range: FM/VHF/UHF

Gain: 30dB

Noise: 3dB

Maximum output level: 110dB

µ

V

Impedance: 75

Power supply: DC 12V

Antenna Extension

Cable

(Purchased

   Separately)

(White)

(Black)

(Blue)

(Yellow)

(Black)

RVTV-B2 or RVTV-W2 Antenna

Отзывы: