Remote Control Touch / blue PiraT Re-
mote
User Guide
Datum:14.12.2018
Seite 8 von 82
RCTouch_UserGuide_V3.4.1.doc
4
System requirements
Control Unit
A Windows based Laptop or PC will be used to configure the devices by
Telemotive System
Client
. It also allows to save the recorded data and to use them offline later.
Telemotive System Client
The software client is used for configuring the data logger as well as downloading the recorded
data or convert these into your needed file format. An firmware update can be performed by the
Telemotive System Client
too to ensure that your devices are always up to date.
blue PiraT2 / blue PiraT2 5E / blue PiraT Mini
The communication between bus systems and control units is monitored and relevant data can
be recorded very precisely with the data logger. The collected data are stored to the logger and
can be downloaded via Ethernet to a PC.
The
blue PiraT2
is our top-class all-in-one data logger. Seven models cover a wide range of
interfaces.
Additionally, the
blue PiraT2 5E
offers improved power management and power backup, five
integrated Ethernet ports and super-fast start-up behavior. The blue PiraT2 can be flexibly ex-
panded via
(TSL).
The
blue PiraT Mini
is smallest data logger in the world with an outstanding functional scope. It
offers a wide range of interfaces, stable temperature behavior, very low energy consumption,
four GBit Ethernet ports, and much more. Different blue PiraT Mini can be flexibly expanded to
one cluster and therefore handled very easily by using
Remote Control Touch
Operate your blue PiraT Mini or blue PiraT2 data loggers safely and comfortably from the driv-
er’s or passenger seat. Via Telemotive System Link our new remote control becomes part of
your logger network. One remote control can handle all connected loggers.
blue PiraT Remote
While Remote Control Touch is just a control unit for handling unique devices or a TSL network,
the blue PiraT Remote additional has logger functionality by offering internal storage and some
interfaces.
License
For some additional features an installed license is required. Settings for licensed features can
be performed with a valid license only.
If you need a license for your logger, please contact our sales department (please find the ad-
dress under contact at the last page).