Remote Control Touch / blue PiraT Re-
mote
User Guide
Datum:14.12.2018
Seite 64 von 82
RCTouch_UserGuide_V3.4.1.doc
To stop the recording, tap on
[Record]
again or
wait until the <Max. recording length> configured in the Telemotive System Client elapses.
Two brief fade-ins appear one after the other:
“Stopped recording!”
Sound recording is stopped.
“Uploaded record!”
Sound recording is uploaded.
button appears in the Marker entry.
Figure 7.8: Voice note recording stops
7.10.2
Marker without voice note
Note: Setting a marker without voice note is confirmed acoustically. If you do not hear an
acoustic signal, increase the volume (see section 7.7).
Tap on
[Trigger]
to set a trigger on the connected devices.
A tone sequence indicates that a marker was set.
A brief fade-in tells you under which index and timing (date and time) the marker was
set.
Marker appears on the tab sheet
[Markerlist]
.
Figure 7.9: Marker set