Remote Control Touch / blue PiraT Re-
mote
User Guide
Datum:14.12.2018
Seite 39 von 82
RCTouch_UserGuide_V3.4.1.doc
6.2.3 The application [Busload] |
Display of all available buses and their channels
The application
Busload
contains one combined tab sheet for each availa-
ble interface of the connected loggers. The tab sheets are named after the
respective bus interface.
If multiple loggers with active GPS / MOST25 / MOST150 are connected,
each GPS resp. MOST interface is assigned a tab sheet.
6.2.3.1
Busload - CAN/Serial/LIN/Ethernet/Camera/CCP_XCP
Each of these tab sheets contains a tabular overview of all channels of the respective bus with
the following displays (here using the example of the tab sheet
[CAN]
):
Channel
number
Channel name
Bus load
Figure 6.20: Tab sheet
“CAN”