Remote Control Touch / blue PiraT Re-
mote
User Guide
Datum:14.12.2018
Seite 38 von 82
RCTouch_UserGuide_V3.4.1.doc
When the test drive is running, the recording can be stopped by the button
[Stop test drive]
.
The test drive is even active, when the TSL cluster goes into standby in the meantime.
During a test drive, the title bar is orange and indicates permanently that a test drive is active.
[Trigger]
button
Test drive list
[Start / Stop]
button
Figure 6.18:
“Stop test drive”
6.2.2.5
Driver View
– Shutdown
The whole TSL cluster can be shut down at once, with the button on the tab
[Shutdown]
[Trigger]
button
[Shutdown]
button
Figure 6.19: Tab sheet
“Shutdown”
