blue PiraT Mini
User Guide
Datum: 14.12.2018
Seite 21 von 60
blue_PiraT_Mini_UserManual_V3.4.1.doc
7.9 MOST150 interface
The MOST150 interface is a standard 2 + 0 connector for MOST fiber optic.
Important:
Maybe the MOST
150 connector can’t be plugged when the 15-pol SUB-D connector is not
locked.
If the MOST connector is not used, the jack must be covered with a terminating plug.
This prevents the sensitive fiber optic contacts from getting dirty. It also makes sure that
the data logger does not start up unintentionally when, e.g., strong sunlight falls onto the
optical contacts.
7.10 MOST150 cPhy interface (Simplex or Duplex)
The MOST150 cPhy connector is he newer version of MOST150 with electrical instead of opti-
cal data transfer.
7.11 Default network settings
Important:
The loggers default setting is *Automatic
DHCP-configuration for TSL
with IP
192.168.0.233*.)and has to be connected by an Ethernet cable to your computer system.
You can download the Telemotive System Client by typing this IP address into your web
browser:
http://192.168.0.233
7.11.1
Resetting the network settings
If you have no access to the logger any more please follow the instructions of chapter 7.1
.
Reset network settings
back to default settings
in standby mode
Start the device.
Push and hold the
[ON / Trigger]
button,
until the STATE-LED flashes red twice.
(~ 15 seconds)
Shut down device and start it again, to
set the settings.
