Magna BLUEPIRAT Series, Руководство пользователя камеры

Страница: 82 / 93

BLUEPIRAT SERIES | CAMERA USER GUIDE/
page 82 of 93
14.3 Front display of BLUEPIRAT2
With the [OFF / Esc] button at the front of the data logger the main window appears on the dis-
play. By switching the rotary knob you can change the displayed interfaces. There you can see
the configuration of the four cameras, represented by “VID” and meaning video. Each sign after
the word “VID” is placed for one video channel.
Three cases are listed:
Case 1
“–” means, the camera license is installed but no configuration has been performed. All four
channels are however recognized.
Figure14.8: Display: VID ----
Case 2
„X“ means, all parameters are configured. The video data are not recorded or there is no con-
nection between logger and server. The following figure shows that camera 1 and 2 are config-
ured but not recorded and camera 3 and 4 are not activated.
Figure14.9: Display: VID XX--
Case 3
„T“ means, logger and server are connected and the videos are recorded. The following figure
shows that camera 1 and 2 are recording and camera 3 and 4 are not configured.
Figure14.10: Display: VID TT--
Does the data recording runs without errors, there should always be shown a “T” (Traffic).
Index