BLUEPIRAT MINI | USER MANUAL /
page 29 of 62
9.7
Note for serial measurements
Note:
The BLUEPIRAT
Mini actively sends data on the “Tx” line, if a protocol for the serial port
is configured. The “Tx” line must only be connected to special devices that support
those protocols. If the application is listening to a bidirectional serial communication of
two devices, two serial ports of the BLUEPIRAT
Mini have to be used. The “Tx” lines
must not be connected in this case.
Device 1
Device 2
blue
PiraT
Rx
Tx
Rx
Tx
RS232 #1 Rx
RS232 #1 Tx
RS232 #2 Rx
RS232 #2 Tx
Figure 9.7: Listening to a bidirectional serial communication
9.8
Adapter cable for Remote Control Voice (RCV)
Figure 9.8: Adapter cable for Remote Control Voice