Magmaweld ID 500M PULSE, Руководство пользователя

Страница: 28 / 168

EN
www.magmaweld.com
28 ID 500 M/MW PULSE
USER MANUAL | MANUEL D’UTILISATION | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
A
B
1
2
3.3 Remote Control
With a torch with suitable properties and a connector, you can also change your welding current (wire speed) / welding voltage through the torch
without going near your machine.
Mode
Classic Mode
Smart Mode
Synergic Mode
1
1
1
You can reduce your wire speed to the minimum tolerance value (-10%).
Setting Range: 0.5 m/dk
You can reduce your welding current to the minimum tolerance value (-10%).
Setting Range:
5 A
You can reduce your welding current to the minimum tolerance value (-10%).
Setting Range:
5 A
You can increase your wire speed up to the maximum tolerance value (+10%).
Setting Range: 0.5 m/dk
You can increase your welding current up to the maximum tolerance value (+10%).
Setting Range: 5 A
You can increase your welding current up to the maximum tolerance value (+10%).
Setting Range: 5 A
You can increase your welding voltage up to the maximum tolerance value (+10%).
Setting Range: 0.5 V
You can increase your welding voltage up to the maximum tolerance value (+ 10%).
Setting Range: 0.5 V
You can increase your welding voltage up to the maximum tolerance value (+10%).
Setting Range: 0.5 V
You can reduce your welding voltage up to the minimum tolerance value (-10).
Setting Range:
0.5 V
You can reduce your welding voltage to the minimum tolerance value (-10%).
Setting Range: 0.5 V
You can reduce your welding voltage to the minimum tolerance value (-10%).
Setting Range: 0.5 V
2
2
2
A
A
A
B
B
B
Button Position
Operation