Maglite ML150LR, Руководство пользователя

Страница: 6 / 76

Section 1
The Flashlight
5
2
3
4
1
5
1. Face Cap -
The removable face cap, which is threaded onto
the head, is O-ring sealed and retains the polycarbonate lens and the
precision-engineered reflector that is the heart of the optical system.
2. Head -
The head houses the reflector and
the LED module. The flashlight’s Quick-Adjustable
Beam operates by rotating the head. About ¼ turn
of the head causes the beam to vary between a wide
floodlight setting and a narrow spotlight setting (Fig.
1). To remove the head, first remove the face cap
and reflector; the head is then free to slide down the
barrel. This maneuver provides access to the O-ring
seal that is seated in a groove on the outside of the
barrel, near the head end, and seals the head-barrel
assembly against grit and moisture.
3. Switch -
Sealed, flush-with-the-barrel electronic switch provides
access to five different functions – Full Power, Low Power, Strobe (12x/sec),
Eco, and Momentary On/Off.
4. Serial Number -
Your flashlight’s unique serial number is permanently
engraved on the barrel for ease of identification and registration. Please note
your serial number for future reference:____________________.
5. Tail Cap -
The tail cap is threaded onto the barrel and retains the
Lithium Iron Phosphate (LiFePO4) rechargeable battery. The tail cap/barrel
junction is sealed by a lip seal that prevents entry of moisture and grit, while
allowing the venting of any gas that may be generated within the flashlight.
The tail cap can be removed to inspect/replace the battery and to maintain/
replace the lip seal.
Fig. 1