Magliner 170 Ergo, Руководство оператора

Страница: 6 / 14

6
!
Caution !
Only turn main battery switch on after tilting the load.
3.3
Main Switch
The main switch is located on the battery cover and is used to turn the power
supply on and off (see section 3.1 Model).
Power can be shut off by doing one of the following:

Turning the main switch on the battery unit

Removing the battery

Pressing the ascend / descend button for 3 seconds or longer

Automatically after 10 minutes of non-use
3.4
Control Box
Speed Switch

When in ascend mode, use
the speed switch to select
high (2 lines) or low (1 line)
speed.

Low speed is advisable for
training, heavy loads, and
awkward locations.

In descend mode the
speed is permanently set
(see section 4 Operation).
Ascend / Descend Button

Briefly press the button to
switch the Powered Stair
Climber to ascend mode
or descend mode.

The Powered Stair
Climber will switch off if
the button is pressed for
more than 3 seconds.
Indicator Light

Constant green means the Powered Stair Climber is in ascend mode
and the round up switch in the handle bar is active. The lifting
mechanism operates when the round up switch is depressed and stops
when released.

Flashing green means the Powered Stair Climber is in descend mode
and the round up switch is inactive.

Constant red means the Powered Stair Climber is in descend mode and
the support wheels move quickly to the descend position.

Flashing red means the Powered Stair Climber is overloaded and the
indicator light will flash for 3 seconds and shut off.

Alternating flashing green/red means the battery charge is low