PRODUCT DESCRIPTION
As a device that can monitor approaching vehicles behind within a certain range, the SEEMEE
508 Radar Tail Light contains a micro radar and a multi-mode controllable tail light. It can be
used together with the display terminal to help improve your perception of the surroundings
during riding.
This device can enhance the detection of the environment but is not a substitute for the rider's
attention and judgment. Please always pay attention to the road conditions and take a safe
ride.
INSTALL THE UNIVERSAL FIXED SEAT
WORKING INDICATOR
TAIL LIGHT MODE
DEVICE INSTALLATION TIPS
List of devices
INSTALLATION PRECAUTIONS
Select a suitable position to install the device to ensure that it will not
affect your riding safety.
Install the device at the appropriate height of the seat rod to acquire
the optimal detection range.
The fixed seat shall be installed vertically, and the matched installing
seat can adapt to most seat rod types and angles.
Correct installation, with the device facing back and perpendicular to
the road surface.
Make sure there is no obstruction in front of the device.
Note: In order to prevent the device from being lost due to the aging and fracture of a rubber
band, the suspending rope that the product is equipped with can be installed together.
SEEMEE 508 USER MANUAL
Scan to check
multi-language
manuals.
①
②
③
④
Button
Tail light
Working indicator
Radar module (built-in)
Power-on/power-off,
switch working mode
Rear warning light,
with multiple flashing
modes
Working indicator, based on indicators such as
power status, charging status, working mode, etc
Radar transmitter module, used to monitor
moving objects behind
Press and hold for 2s to
power on
Click the button to switch
the mode:
Solid mode → Flash mode
→ Pulse mode → Peloton
mode → Single Radar
mode, cyclic switching
①
Button
②
Tail light
③
Working
indicator
④
Radar
module
(built-in)
Fixed seat*1
Host*1
Rubber band*3
Charging cable*1
Rubber pad*1
70*63*3.5
49*42*3.5
36*29*3.5
15°
Pulling
Round
tube
Square
tube
1. Select an appropriate position of
the rubber pad according to the shape
of your seat rod, and place the rubber
pad on the back of the fixed seat.
3. Fix it with a rubber band.
2. Place the fixed seat and rubber pad
on the seat rod.
4. Align the card tray on the back of
the device with the card slot of the
fixed seat and turn it clockwise until
the device is locked.
Working indicator
The indicator flashes quickly
The indicator flashes slowly
The indicator flickers
The indicator goes out in
the working status
Description
Low battery
Charging, it goes out after
being fully charged
Firmware update in process
Radar function off
Radar failure
The indicator is always on
Indicator
luminance
Mode
Runtime
Solid mode
Flash mode
Pulse mode
Peloton mode
Single Radar mode
Brake
On
On
On
Soft
On
None
Highlight
Default flash
setting
None
6H
10H
10H
16H
/
12H
8H
Slow
Slow
None
Rotating
None
On for 3
seconds
Rotation mode
