Magicard Pronto 100 Скачать руководство пользователя страница 38

Страница: 38 / 42

Pronto 100 ID Card Printer – User Guide

Error code 13:19

Reason:

While updating the dye control calibration, the printer detected that the motor current and blue

duty cycle were out of range.

Error code 13:20

Reason:

While updating the dye control calibration, the printer detected that the motor current and green

duty cycle were out of range.

Error code 13:21

Reason:

While updating the dye control calibration, the printer detected that the motor current and green

and blue duty cycles were out of range.

Error code 13:22

Reason:

While updating the dye control calibration, the printer detected that the motor current and red

duty cycle were out of range.

Error code 13:23

Reason:

While updating the dye control calibration, the printer detected that the motor current and red and

blue duty cycles were out of range.

Error code 13:24

Reason:

While updating the dye control calibration, the printer detected that the motor current and red and

green duty cycles were out of range.

Error code 13:25

Reason:

While updating the dye control calibration, the printer detected that the motor current and red,

green and blue duty cycle were out of range

14: SD CARD UNSIGNED

Error code 14:0

Reason:

The internal SD card did not have a valid signature.

17: UPGRADE INVALID

Error code 17:0

Reason:

While attempting to validate an upgrade file, the printer found that the file was not in the right

format. Either it is not the right type of file, or the data has been corrupted.

Error code 17:1

Reason:

While attempting to validate an upgrade file, the printer found that the file was not in the right

format. Either it is not the right type of file, or the data has been corrupted.

Error code 17:2

Reason:

While attempting to validate an upgrade file, the printer could not interpret the file's upgrade

commands. Either it is not the right type of file, or the data has been corrupted.

18: UPGRADE NOT AUTH

Error code 18:0

Reason:

While attempting to validate an upgrade file, the printer found that the file was not licensed for this

printer. It is possible that the file was intended for a different printer.

Содержание Pronto 100











































Результаты поиска

Содержание Pronto 100

Отзывы:

Бренды по названию

Популярные бренды

Magicard Pronto 100, Руководство пользователя

Результаты поиска

Содержание Pronto 100

Отзывы:

Бренды по названию

Популярные бренды