Magic PM160, Руководство пользователя

Страница: 36 / 52

30 P160 User Manual
Master Device
Slave Device
User
Out
As the figure says, Combined Verification 1 is
made up of five members coming from five
different groups---access group 1 / 3 / 5 / 6 /
8 respectively.
Note:
To delete a Combined Verification, set all access group numbers to 0.
Anti-passback Setup
 

To avoid some persons following users to enter the door without verification, resulting in security
problem, users can enable anti-passback function. The check-in record must match with check-
out record so as to open the door.
This function requires two devices to work together: one is installed inside the door (master
device), the other one is installed outside the door (slave device). The two devices communicate
via Wiegand signal. The Wiegand format and Output type (User ID / Badge Number) adopted by
the master device and slave device must be consistent.

Anti - Passback Direction
No Anti - passback : Anti-Passback function is disabled, which means passing verification of either
master device or slave device can unlock the door. Attendance state is not reserved.