INSTRUCTION MANUAL
#90505 R/C Carnivolt
Batteries Installation :
The operation requires TWO “AA” size batteries for the dinosaur and Two “AA” size batteries for the transmitter.
Install batteries to the dinosaur:
Carefully remove product from package.
Locate the battery compartment on the bottom of the dinosaur.
Unscrew and remove the battery cover as in indicated in Diagram A point #1.
Then fill TWO “AA” size batteries in.
Diagram A
Install batteries to the transmitter:
Unscrew the battery compartment door on the back of the transmitter.
Slide out the door from the battery compartment.
Insert 2 pieces of “AA” size batteries to the battery compartment according to the polarity direction as engraved
inside.
Close the battery compartment door by the screw.
Running the R/C dinosaur:
Step 1 : Install the batteries on both the dinosaur and transmitter as mentioned above.
Step 2 : Turn on the switch on the dinosaur. The switch is located at the bottom of the dinosaur as illustrated in
OFF/ ON Switch
1.
Unscrew and remove the
battery cover.
