Version 1.0
Page 16
1
3.
Open the valves of the gas bottles.
1
2.
You will see the address behind CO
2
1
flash on and off. This is the address with
which a series of 5 CO
2
addresses starts.
Change to the required address by
pressing the ▲ or ▼ button. Then press
the MODE button to confirm your choice.
The other outputs will automatically be
consecutive. For example: you set
channel 2 as 1
st
output of the CO2
Dominator. The 2
nd
output will be channel
3, the 3
rd
output channel 4 etc.
