61
English
2. Repositioning a Point Feature
If a point feature appears to be mislocated on the Map screen,
do the following after you have arrived at the feature:
-
Press the LOG key and tap the on-screen
Log
button. Let
the ProMark3 recompute the point position and then tap
the
Done
button to close the feature.
Note that only point features can be repositioned. If you
wish to reposition a line or area feature, you should record
a new feature and then delete the old one in MobileMap-
per Office.
3. Adding More Features and Attributes to the Job
If you want to add more features and descriptions to the exist-
ing job, you just have to record them exactly as you record fea-
tures into a new job.
4. Closing the Job
To close a job, from the screen showing the list of attributes,
tap
Done
then confirm by tapping
Yes
.
