58
English
-
As you would for a point feature, describe the feature
by describing the different attributes pertaining to the
feature.
-
When the description is finished, you can start walking
along the road.
-
When you arrive at the end of the road, with ProMark3
still displaying the Logging screen, tap
Done
to stop
logging the feature.
4. Logging and Describing an Area Feature
Basically, you use the same procedure as when you log a
line feature, especially regarding the need for defining a
logging interval (see 3. above).
The only difference between a line and area feature is that
for an area feature, the first and last position calculated
by the receiver are connected when you close the feature.
Record the attributes of an area feature as you do for a
line feature (see page 57):
-
Tap the name of the “Park” area feature from the list
of features and tap the
Log
button. ProMark3 starts
logging the area feature.
-
Choose a logging interval using the
Options
button (see
explanations given for a line area on page 57). This
takes you back to the Logging screen where the list of
attributes for the feature is displayed
-
Describe each attribute by selecting or entering the
appropriate attribute value for each of them.
Logging screen
This screen displays the
current values of perime-
ter and area measured
since you started logging
the feature (+ number of
satellites and PDOP)
