30
English
To save the as-staked position:
• Tap the
OK
button. This opens a new screen on which
you can now see the
Remain
field count down. In the
window’s title bar is the name of the log file where the
position is about to be saved. Note that a non-editable
Site ID
, different from the name of the target point, is
automatically assigned to that position. GNSS Solu-
tions will automatically make the correspondence
between the target point and the saved position.
When
Remain
=00:00:00, the
STORE
button appears at
the bottom of the screen (see screen below right).
• Tap the
STORE
button. This saves the point position
and takes you back to the stakeout screen.
9. Tap
Next
to display the list of control points from which
you can select a new target point.
10.Resume steps 4 through 7 until all the points have been
staked out, then tap
Done
to end the stake out survey. This
takes you back to the last displayed navigation screen.
If you have also logged the positions where you placed
your stakes, tapping
Done
also closes the log file contain-
ing the measured positions of all these points.
Quitting The Surveying Function
Press the MENU key and tap
Exit
. This takes you back to the
ProMark3 RTK workspace.
