7
English
Initializing GPS
Take the receiver to a location where there is a clear view of
the sky, then:
-
From the ProMark3 workspace, tap successively the
Utili-
ties
icon and then the
GPSInit
icon.
-
Initialize the receiver using one of the two methods below:
1.If you don’t have the slightest idea of what the coordi-
nates of your current position are, check the
Choose
Country
option (see screen below left), select respec-
tively your region and country in the two fields under-
neath, enter the date and time (bottom of the screen)
and then tap
OK
to start the initialization process. This
closes the GPS Initialization window.
2.If you have a rough idea of what the coordinates of
your current position are, directly enter these coordi-
nates in the
Latitude
and
Longitude
fields (see screen
above right), enter the date and time (bottom of the
screen) and then tap
OK
to start the initialization pro-
cess. This closes the GPS Initialization window.
Please Go Outside to Per-
form Initialization!
Initialization is required
when 1) the receiver is
brand new, 2) you have
moved more than 500
miles from the last place
you were using it, 3) mem-
ory has been completely
erased or 4) the receiver
has not been used for more
than a few months.
