Magellan MobileMapper MobileMapper 6, Руководство по началу работы

Страница: 13 / 28

English
5
Rear View
Camera Lens
Keep the camera lens [8] clear when taking pictures or
recording videos.
Loudspeaker
As a multi-media device, MobileMapper includes a high-
quality loudspeaker
[9] , which can be used by any voice-
based software application.
USB Data Connector
Use this connector [10] to secure the Magellan USB Data
cable onto the receiver. The MobileMapper 6 USB port is
used exclusively for a connection to a computer via Microsoft
ActiveSync.
When this cable is used, the MobileMapper 6 is powered from
the computer and the receiver batteries are neither used nor
charged.
Battery Compartment
The receiver uses two standard AA batteries, whether
rechargeable or not. To access the battery compartment
[11] ,
loosen the quarter-turn finger screw [12] .
Side View (Left)
Flashlight Button
The flashlight button [13] has two functions:
• Screen backlight: Press the button shortly to change the
screen backlight setting. There are five different backlight
levels (off, low, medium, high, very high). Each new short
press on the button allows you to select the next backlight
level.
• Flashlight: A long press on this button (about two
seconds) will turn on the flashlight. To turn it off, hold the
button pressed until the light goes out.
Hold Slide Switch
Setting the Hold slide switch [14]* to “HOLD” freezes the
screen and makes the stylus and buttons unusable. Use this
button to suspend the use of the receiver and protect it from
any accidental action.
External Antenna Input
Use the external antenna input [15]* to connect an external
antenna to the receiver. When an external antenna is
[8]
[11] [10] [12]
[9]
[13]
[14]
[15]