Magellan MobileMapper CE - Hiking GPS Receiver Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 74

Magellan MobileMapper CE - Hiking GPS Receiver Скачать руководство пользователя страница 47

English

41

Power & Memory Management

Power Modes

MobileMapper CE comes with a removable/rechargeable bat-
tery, which provides enough energy for a full working day –pro-
vided you start your day with a fully charged battery. In order
to ensure a longer battery life, use the external power whenev-
er possible. When used, the external power source also auto-
matically recharges the internal battery.

The built-in advanced power saving features also help to opti-
mize power consumption while the system is idle. The Mo-
bileMapper CE system has three power saving modes when
the battery power is used:

1.

User Idle

mode: Backlights for both the display and keypad

are switched off. Press any key or tap on the screen to
switch on the backlights again.

To switch off the backlights, tap

(backlight) in

Control

Panel

. In the

Backlight Control

dialog that opens (see figure

opposite), tap the

Backlight OFF

button.

2.

System Idle

mode: The display as well as the backlights are

switched off, but all the processes are still running. The
power LED is on. Press any key or tap on the screen to
switch on the display again.

3.

Full Shut Down Mode

: The system is shut down. The

MobileMapper CE is switched off. The Power LED is off.

You can configure the MobileMapper CE handheld to automat-
ically enter each mode when it has been idle for a specified
time.

To change the idle time, tap

Power

in the

Control Panel

.

Then make the necessary changes in the

Schemes

tab (see op-

posite.)

«
...
45
46
47
48
49
...
»

Содержание MobileMapper CE - Hiking GPS Receiver











































































Отзывы:

Нет отзывов