MAGA s.r.o., S. Kollára 86, Čerenčany 979 01, Slovak Republic.
+421 917 465 298, [email protected],www.magasro.sk
Made in Slovakia
18
wood is almost completely consumed and only carbon remains in the loading chamber. We do
not recommend replenishing wood during normal operation, when there is more than 20% of
the volume of the chamber in the loading chamber, because pyrolysis takes place in the loading
chamber without access to oxygen, which creates smoke and it cannot be well aspirated after
opening the door. The application itself is done by opening the door to about 15 mm, waiting for
the smoke to be sucked out and opening the door completely. Then we put the wood into the
chamber as quickly as possible. The wood must move freely in the loading chamber and there
must be gaps of at least 1 to 2 cm between the individual logs. After loading the wood into the
chamber, we can close the door.
6.4 PROTECTIVE EQUIPMENT FOR WORKING WITH THE BOILER
When working with the boiler, it is necessary to use protective equipment in accordance with
the applicable rules of safety and health at work. Particular care must be taken to protect health
when operating, cleaning and inspecting the boiler. It is necessary to use gloves with increased
heat resistance, suitable clothing and sturdy shoes.
5.5 BOILER CLEANING
In order for the boiler to work properly and achieve the required comfort and durability, it must
be cleaned regularly.
NOTICE:
Clean the boiler after switching it off and after disconnecting it from the mains. Always
clean the boiler thoroughly and regularly. Thorough or irregular cleaning can lead to incorrect
combustion and reduced boiler life. A boiler that is not cleaned regularly and sufficiently is void!
WARNING!
Both the combustion chamber and the refractory fitting will remain hot for several
hours after the boiler has been switched off!
Turbulators with cleaning springs are controlled by a lever on the side of the boiler. Boiler
cleaning must be done regularly and thoroughly every 3 - 5 days, because sedimentation
