© 2020 MAG SLB220
Connection
1. Connect AC220V power cable to the MCB.
2. Connect dry contact signal from card reader to terminal “Enter“, “GND“ and “Exit“ on the main board.
3.
Connect driver and synchronize cables between master and slave as below:
Menu Setting -
Enter setting mode by press and hold the “Enter“ button for 3s.
Description
Remark
1. Parameter
1.1 Counter
Display pass through count. (both way)
1.2 Gate Mode
Set gate mode of enter and exit:
1. NC both Rej
2. NC both Free
3. NC both card (default)
4. NC card Free
5. NC card Rej
6. NC Free card
7. NC Free Rej
8. NC Rej Free
9. NC Rej card
10. NO both Free
11. NO both card
12. NO card Free
13. NO Free card
1.3 Pass Timeout
Set maximum waiting time 10-255, unit 0.1s (default is 5 seconds)
1.4 Memory
Set scan card with memory mode
0. Both disable (default), 1. Entry allow, 2. Exit allow, 3. Both allow
1.5 Read In Lane
Set to allow card scanning when user standing in the lane. 1. Not allow (default), 2. Allow
1.6 Open Delay
Set door open delay time 0-255, unit 0.1s (default is 0)
1.7 CLS Delay
Set door close delay time after user has walked through the lane, unit 0.1s (default is 0)
1.8 Rebound Time Rebound time = Time of door rebound when it is blocked during closing (30-250),
(default 100) [higher value, slower movement]
1.9 Action Time
Action time = Time of door open/close. (30-250), (default 100) [higher value, slower movement]
1.10 Pass End
Set end position IR sensor function (Do not modify) 1. Exit (default), 2. Safety
1.11 Intrude Set
Set intrude alarm mode. 1. No alarm, 2. Alarm, 3. Alarm and close (default)
1.12 Reverse Set
Set reverse alarm mode. 1. No alarm, 2. Alarm, 3. Alarm and close (default)
1.13 Tail-Gating
Set Tail-Gating alarm mode. 1. No alarm, 2. Alarm, 3. Alarm and close (default)
1.14 Adv. Param.
Advance parameter setting (Only for professional engineer level)
2. System Set
2.1 Language
Set menu display language 1. English (default) 2. Chinese
2.2 Device Type
Display Controller Device Type
2.3 Version
Display hardware and firmware version
Single lane connection
Multiple lanes connection
