10
English
off and permit to stop. Slide the gear shifter back (away from chuck).
NOTE:
Do not change gears when the tool is running. If you are
having trouble changing gears, make sure that the dual range gear
shifter is either completely pushed forward or completely pushed back.
OPERATION
WARNING: To reduce the risk of serious personal injury,
place the forward/reverse button in the lock-off position or
turn tool off and disconnect battery pack before making any
adjustments or removing/installing attachments or accessories.
G
H
FIG. 4
Installing and Removing the Battery Pack
(Fig. 4)
NOTE:
Make sure your battery pack is fully charged.
To install the battery pack (H) into the tool handle, align the battery
with the rails inside the tool’s handle and slide it into the handle until
the battery pack is firmly seated in the tool and ensure that it does not
disengage. To remove the battery pack from the tool, press the release
button (G) and firmly pull the battery pack out of the tool handle. Insert
it into the charger as described in the charger section of this manual.
Worklight (Fig. 2)
There is a worklight (C) located under the torque adjustment collar
(D). The worklight is activated when the trigger switch is depressed,
and will automatically turn off 20 seconds after the trigger switch is
released. If the trigger switch remains depressed, the worklight will
remain on.
Torque Adjustment Collar (Fig. 3)
FIG. 3
D
E
The torque adjustment collar (D) is clearly
marked with numbers and a drill bit symbol.
The collar should be rotated until the desired
setting is located at the top of the tool.
Locators are provided in the collar to eliminate
the guess work when selecting fastening
torque. The higher the number on the collar,
the higher the torque and the larger the
fastener which can be driven. To lock the
clutch for drilling operations, move to the drill
bit position.
NOTE:
When using the drill/driver for drilling
holes, be sure that the torque adjusting collar
is set so the figure of the drill is aligned with
the center line on the top of the tool. Failure
to do this will allow the clutch to slip while
attempting to drill.
Dual Range Gearing (Fig. 3)
The dual range feature of your driver/drill allows you to shift gears for
greater versatility.To select the low speed, high torque setting, turn the
tool off and permit to stop. Slide the gear shifter (E) forward (towards
the chuck). To select the high speed, low torque setting, turn the tool
Содержание BDP050
Страница 2: ......
