Removing the Belt Clip
Procedure:
1
To remove the clip, press the belt clip tab away from the battery.
2
Slide the clip upwards and away from the radio.
3.5
Attaching the Universal Connector Cover
When and where to use:
Replace the universal connector cover or dust cover when the universal
connector is not in use.
Procedure:
1
Insert the slanted end of the cover into the slots above the universal connector.
2
Secure the connector cover to the radio by pressing the cover inwards.
3.6
Removing the Universal Connector Cover
Procedure:
Remove the universal connector cover or dust cover by pulling the cover out.
MN007942A01-AA
Chapter 3 : Getting Started
13
