MAFI MT 25, Руководство по эксплуатации

Страница: 77 / 144

OPERATION
MULTI-FUNCTION DISPLAY
Operating Manual MT 25 / 30 YT 75
Normal display
Fig. 64: Normal display
1 Motor speed
2 Driving speed
After ignition switch-on, the multi-function display conducts
a self-test.
z
All function indicators illuminate.
z All display segments are activated.
z
All sensors are checked.
After the self-test, the multi-function display automatically
changes to normal display, as long as there are no sensor
error messages. The normal display shows:
z driving speed in km/h or mph,
z
motor rpm speed.
Pressure indicator
Fig. 65: Pressure indicator
1 Button “Brake pressure”
2 Buttons “Transmission oil pressure”
3 Button “Motor oil pressure”
4 “Pressure” indicator
With the buttons 1, 2 and 3 you can read the pressures de-
scribed below. The value is shown in the display at position 4 .
All pressures are shown in bar.
Switch 1 :
z air reserve pressure circuit 1
z
air reserve pressure circuit 2
z air reserve pressure circuit 3
T h e r e s e r ve p r e s s u r e s o f c i r c u i t s 1 t o 3 c a n b e d i s -
p l aye d i n c o n n e c t i o n w i t h t h e sw i t c h “ R e s e r ve p r e s -
s u r e ” . T h e c i r c u i t s h ow n d e p e n d s o n t h e p o s i t i o n o f t h e
“ R e s e r ve p r e s s u r e ” sw i t c h .
Button 2 :
z transmission oil pressure
Button 3 :
z motor oil pressure