manualshive.com logo in svg

MAFI 3260028, Руководство по эксплуатации

Поделиться
Скачать
MAFI 3260028 Скачать руководство пользователя страница 19

SAFETY

INTENDED USE

Operating manual T225 / 230 

17

Intended use

The MT may be employed only as a tractor. It is designed and 
adapted for the special usage requirements in

z

terminal traffic in harbours.

The MT may only be driven on the traffic routes permitted by 
the company.

The MT is designed and built for carrying the following loads:

T 225

T 230

Only for training and instruction purposes is another person 
allowed to be seated on the foldaway seat of the MT.

Please observe the engineering shop directive (VMDA) 
“Guideline for the intended and proper use of industrial trucks” 
and the accident prevention regulation “Industrial Trucks” 
(BGV D27).

If your MT is to be used for work not specified in these 
directives, please consult your nearest MAFI representative.

Refittings, attachments, and retrofittings on the MT may only 
be done upon consultation with MAFI.

Spare parts, ancillary attachments, extra installations, and 
accessory components have to be authorised by MAFI before 
use.

System load (GCW)

80,000 kg

Coupled load at 6 km/h

25,000 kg

System load (GCW)

90,000 kg

Coupled load at 6 km/h

32,000 kg

Содержание 3260028

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды