Z5Ec
02/2022
23
5.5.1
Working with the parallel guide fence
Use the following procedure to install the
parallel guide fence:
1.
Loosen the two wing screws (5).
2.
Insert the parallel guide fence (B) into the
guide provided for this purpose.
3.
Tighten the two wing screws (5).
✓
The parallel guide fence is installed.
Fig. 21: Installing the parallel guide fence
Use the following procedure to adjust the
cutting width:
1.
Loosen the two wing screws (5).
2.
Adjust the parallel guide fence (B).
3.
Tighten the two wing screws (5).
✓
The cutting width is adjusted.
Fig. 22: Adjusting the cutting width via the parallel guide
fence
Alternatively, you can guide the machine with the parallel guide fence along a guide rail
or a wooden ledge fixed on the workpiece. This requires the parallel guide fence to be
rotated so that the guide tab points upwards.
