K85Ec / KSS80Ec 370
20
01/2022
As soon as the braking time exceeds 7 seconds, have the machine checked and a new
brake pad installed.
5.5
Handling at overload
Switch off the machine in the event of an overload. Switch the machine back on and continue sawing at a
reduced feed rate.
5.6
Cutting depth setting
The cutting depth can be set continuously in a range between 0 and 88 mm [0 to 3.5 in].
Use the following procedure to set the cutting
depth:
1.
Press and hold the pushbutton (18).
➢
The cutting depth is indicated on the
scale (2) on the cover. The area with a
red background of the plunge lever (1)
serves as pointer.
2.
Use the plunge lever (1) to set the cutting
depth.
3.
Release the pushbutton (18).
✓
The cutting depth is set.
Fig. 16: Setting the cutting depth
For separating cuts, always set the
cutting depth to approx. 2 ... 5 mm
[0.08 ... 0.2 in] more than the
material thickness you want to cut.