Mafell FM 1650 PV-LO, Перевод оригинальной инструкции по эксплуатации

Страница: 25 / 206

-25-
2.3 Technical data
FM 1650 PV-LO
Operating voltage / V
230
Mains frequency / Hz 50
Input power / W
1650
Nominal current / A
7.2
Supply voltage / V* 8 - 56
Control voltage for speed specification / V* 0 - 10
Display remaining runtime / V* 0 - 5
Power consumption / mA* 3 - 5
Idling speed / rpm -1
4000 – 23000
Tool holding fixture with collet Ø / mm
8
Tool shank / mm 3 - 12.7
Milling cutter Ø, max. / mm
60
Grinding tool Ø, max. / mm
60
Weight without mains cable / kg
3.22
Length of connecting cable / m 4
Dimensions (W x L x H) / mm
98.4 x 85.6 x 346
* Specifications for the portal interface (PV interface)
2.4 Emissions
The declared noise emission values have been measured in accordance with DIN EN 62841-1 and may be used
for comparing the tool with another and also in a preliminary assessment of exposure.
Danger
The noise emissions during actual use of the power tool can differ from the declared
values depending on the ways in which the tool is used especially what kind of
workpiece is processed.
Always wear hearing protection, even when the power tool ist running idle in addition
to the trigger time!
2.4.1 Noise emission specifications
Noise emission values determined according to DIN EN ISO 3744:
Sound pressure level L
PA
= 81.9 dB (A)
The noise measurement was done without tool at idling speed.