MAEVING RM1, Руководство пользователя

Страница: 32 / 84

Maeving
|
RM1 Owner’s Handbook 32
BATTERY
Installing the secondary battery
1. Open the storage compartment. For further information, see
Storage compartment on page 36.
2. Turn the ignition key to the
OFF
position.
3. Carefully lift the secondary battery and align it with the
secondary battery storage compartment before inserting.
Note : The LED indicator on the secondary battery must be
located to the right, as shown.
4. Carefully lower the battery (1) and push forward into position (2),
making sure that the battery fully engages with the connector.
Charging the battery
Your motorcycle is supplied with a combined battery charger (1) and
a charging base unit (2).
Find a suitable location to charge your battery. This should be:
•
Out of direct sunlight;
• Not exposed to water;
• On a firm and level surface; and
• In an ambient temperature of +10 °C to +35 °C.
Plug the charging base into the battery first, then plug the battery
charger into the mains. Make sure that the charging base unit sits flat
and the electrical cables are fully extended and free of knots.
Caution : Only use the official charger supplied by Maeving to
charge your battery. Using an incorrect charger may damage
the battery and may result in a fire.
! ! !
! ! !
1
2
2
1
2