Maestro MR 929, Руководство пользователя, Страница: 7 / 44

7
EN
ATTENTION!
When switched on for the first time a slight odor might be emitted for a few minutes. This is harmless
and occurs with most heaters when any slight traces of dust or lubricants that may have collected in
the factory are heated away.
During using the heater, please do not open the door or window continually otherwise it will influence the
heating effect.
Please operate the machine according the control keys on the control panel or the
infrared controller.
Уou can see the control panel and infrared controller in this paper.
1. Turn on the power switch, LED display Environment
temperature, the appliance is standby;
2. At the right side of the appliance base have a switch, Press
“START/STOP”, High heat and Swing, press again, the
appliance will shutdown.
3. All function need to be operated by infrared controller
4. After operation 10 minutes, the blue twinkle light will
be off. Press any key of switch to awake the appliance, the
blue twinkle light will be on, then you can operate all
function. Fan keep working for 30 seconds when shutdown the appliance(after heating)
Note:
The indicator lights when corresponding function is working.
Infrared controller
1.Press “On/off” as follows: ON(Fan working, the blue twinkle
light is on),
OFF(Fan keep working for 30 seconds when shutdown the
appliance after heating),
2. Press “Heating” as follows: Low heat (one “ ” light on),
High heat (two “ ” light on), FAN working.
3. Press “SWING” as follows:, SWING ON (“ ” light on), SWING OFF,